Skip to:

GRI Blog

Geocue True View 410 LIDAR

July 07, 2020 - Cary McCraine
Accompanying Software Screenshot
Geocue's True View 410 LIDAR system is unique in that it has multiple sensors in one package. In addition to the Quanergy M8 LIDAR, it houses two 20 MP RGB cameras that are canted off to the left and right of the direction of travel. This offset allows the cameras to cover the same swath that the LIDAR covers resulting in colorized 3D point clouds. With the accompanying software, it is possible to have a 3D map of an entire area including the canopy of trees, shrubs, and can even pick out power line uprights and the lines themselves.

The LIDAR is accurate to better than 5 cm RMSE and collects three returns. This allows for some vegetation penetration to the ground beneath the canopy. Geocue's True View Evo software allows for detailed ground extraction and smoothing and can produce a number of deliverables such as RGB Orthomosaic, DEM, point clouds, and contour maps.

Below, you can see the RGB orthomosaic of the Mesocosm out at North Farm. The bottom window is the profile window which shows the 2D profile of a shed on the left and multiple aquatic vegetation specimen tanks on the right. The top right window is the 3D viewer window which allows you to see the lidar points in RGB or in a colormap based on height. In the 3D viewer below it is possible to see the body of the shed and the specimen tanks. The sensor is so sensitive it is possible to see the uprights which are holding shade cloth surrounding the tanks.

Mesocosm at North Farm
Field 2B at North Farm